Custom-built industrialized and prefabricated steel homes
Assembly of the steel frame and panels of a starmodul home in cambrils

Technical Guide

Construction Details of a Prefabricated House

How a StarModul prefabricated house is built, step by step: foundations, floor slabs, facades, and roofs, as well as the joints at windows, corners, eaves, and ridges that maintain a continuous, insulated building envelope.

How it is built

A steel and sandwich panel home, layer by layer

The construction details show how each part of a StarModul home is solved: foundations, bolted steel frame, floors, facades and roof.

They are reference solutions that our technical team adapts to each project. With the complete envelope (100 mm panel, rock wool and inner lining), the U-value is 0.155 W/m²K for walls and 0.128 W/m²K for the roof.

  • Kit with or without assembly
  • Permits just like a conventional house
  • Structural calculation by StarModul
  • Assembly drawings and labelled pieces

Technical documentation

Bolted steel frame of a two-story starmodul home during assembly

These are general guidelines: the final design of each house is defined in its technical drawings and structural calculations.

Technical Solutions

The four systems that define a prefabricated home

These are the areas where the structure, insulation, exterior walls, and finishes must work together.

Foundations

Slabs, footings, or sanitary floor slabs, coordinated with the structural anchors, insulation, and the base of the facade.

View foundation

Floor Slabs and Floors

Floor and inter-story slab solutions, where they meet the facade and the interior partitions.

View floor slabs

Facades

Facade sandwich panel, SATE, or ventilated facades, and the treatment of openings, corners, and subframes.

View facades

Covers

Flat and sloped roofs, roof slopes, eaves, gables, ridges, and gutters.

View Covers

1 · Foundations

Foundation for a Prefabricated House

The house is lightweight, so the foundation is designed to handle low loads. It is determined based on the geotechnical study, the loads, and the structural analysis. These are the standard solutions for StarModul homes.

Detail of the concrete slab foundation for a prefabricated house

Reinforced concrete slab

Continuous on-site support, with insulation and moisture barriers. This is the most common solution: it serves as both the foundation and the subfloor. Thicknesses and reinforcement are calculated for each house.

Close-up of a steel-framed slip-on slipper for home use

Running shoes

Reinforced concrete strip foundation beneath the structure. Its size and reinforcement depend on the soil conditions and the loads on the house.

Cavity-type foundation coordinated with the starmodul structure

Cavity-type foundation

Coordinated with the layout, the support plates, and the anchors of the steel structure, and calculated for the project.

Starmodul sanitary floor slab elevated above ground level

StarModul Ventilated Floor

The house is elevated above the ground on a steel structure designed specifically for it and compatible with the system's sandwich panels.

How the foundation is connected to the structure

The connection between the foundation and the structure is defined during the layout process to ensure proper support, anchoring, elevations, and the continuity of the exterior walls.

  • Preliminary layout of axes and support points.
  • Foundation dimensions determined by the geotechnical engineer and the structural analysis.
  • Coordinated anchors, plates, and structural foundation.
  • Insulation, moisture control, and the connection to the exterior envelope have been addressed.

2 · Structure

Bolted steel structure

The structure is assembled on the already leveled foundation. After layout, frames, bracing, and floor slabs are formed by connecting the tubes with StarModul components.

It is secured to the foundation with anchor bolts and high-strength bolts. Only hand tools are needed for installation: the parts are lightweight and can be handled by hand.

  • Galvanized steel tube measuring 100 × 100 mm and 100 × 50 mm.
  • Patented joints at all connections, without welding.
  • Thicknesses and reinforcements are determined based on each manufacturer's calculations.
Steel frame of a prefabricated house mounted on the slab
Structure mounted on the slab

3 · Slabs and Floors

Floor Slabs in a Steel-Frame House

The floor system is selected based on the loads, the floor plan, and the construction method. Within a single house, concrete slabs, hollow-core slabs, and steel floor systems can be combined between floors.

Insulated floor slab on grade with radiant floor heating

Slab on Ground

Ground floor with insulation, a water or vapor barrier, radiant floor heating, and the flooring of your choice.

Sanitary floor slab of a prefabricated house

Sanitary Slab

The house is separated from the ground by a drainage chamber, which is useful on damp or areas with a slope.

Floor slab between stories made of steel pipes

Floor Slab Between Stories

Steel tubes and supporting components designed to support the upper floor.

Steel floor slab with concrete and heating

Reinforced Concrete Slab

If the project calls for it, the floor slab can be poured with concrete. Its composition, reinforcement, and thickness are determined on a case-by-case basis.

Floors, joints, and partitions

On top of the slab are the insulation panel with a moisture barrier, the underfloor heating pipes, a layer of mortar, and the flooring. The floor structure detail also includes:

  • The junction between the floor slab and the exterior wall.
  • The starting point of the interior partitions on the floor.
  • Insulation and finishing layers.
  • Facade openings and interior levels.
Sanitary floor slab in a prefabricated house with a steel frame
Sanitary floor slab in a StarModul home

4 · Facades

Facades for a prefabricated steel house

The sandwich panel encloses the house and can either be left exposed or serve as a base for other finishes. The final facade is tailored to the project's aesthetic and performance requirements.

Facade sandwich panel on a prefabricated house

Sandwich panel

Steel panel with a polyurethane core, highly insulating and watertight. The thickness is selected based on thermal performance.

Facade with etics on sandwich panels

SATE

Exterior insulation applied to the building envelope, with mesh, mortar, and a final finish. Learn more at sate-caravista.com.

Ventilated composite facade on a prefabricated house

Ventilated facade

Exterior substructure and composite panels made of aluminum, fiber cement, or Viroc. Learn more at panel-composite.com.

Exposed-brick facade on a house with a steel frame

Ceramic, stone, brick, wood, or stucco

Traditional or contemporary finishes to give your home the look you want.

Joints Between the Facade and Continuous Insulation

The facade integrates the structure, cladding, insulation, interior wall lining, and exterior finish. Inside, the walls are lined with gypsum board and insulation, and the partition walls are also drywall. The areas that require the most attention:

  • Continuity of the enclosure at interior and exterior corners.
  • Top, bottom, and side joints of the windows.
  • Subframes and drip edges.
  • Thermal Insulation Continuity and Thermal Bridges.

5 · Tires

Roofing for a prefabricated house

The roof is designed based on the shape of the house, the slopes, the loads, and water drainage. It is almost always a double-layer roof: an upper panel deck, an air space, and an outer roof layer.

Walkable flat roof of a prefabricated house

Flat roof

Including the creation of slopes and waterproofing, and coordinating insulation, joints, and drainage.

Single-slope roof with a steel substructure

Single-slope roof

The steel substructure creates a single slope that carries the water to the collection point.

Gable roof of a house with a steel frame

Gable or multi-gable roof

Pipes and fittings designed for the sloped skirting, ridges, and junctions as intended.

Flashing panel roof on a starmodul house

Flashing Panel Roofing

The kit solution: a substructure made of 100 × 100 and 100 × 50 mm tubes, a 30 mm sandwich panel with flashing, flashing pieces, and a concealed channel.

Roof Flashing and Gutter Systems

The roof details address slopes, ridges, eaves, junctions with the facade, and water drainage without disrupting the building envelope.

  • Earrings made with a steel substructure.
  • Roof sandwich panel and roof layers as specified in the project.
  • Eave, gable, and ridge joints.
  • Drainage channels, flashings, and waterproofing at critical points.
Roof of a prefabricated house with a steel frame
Double-wall tire with an inner tube

6 · Technical Meetings

Detailed drawings of a prefabricated house

This is how the structure, sandwich panels, insulation, facade, roof, floor slabs, woodwork, and finishes are coordinated at key points throughout the house.

Download all the details as a PDF All technical documentation

How to Read the Details

What Do These Design Details Achieve?

Continuous insulation

They show how the sandwich panel, exterior insulation, air chambers, and interior cladding are joined together so that the building envelope has no weak points.

Doors and windows

Jambs, lintels, sills, subframes, and drip edges integrate the woodwork with the insulation and exterior finish.

Water and Roof

Eaves, gutters, ridges, and roof junctions are key to water drainage and protection against water damage.

Structural Work and Facade

The edge of the slab and the base of the wall combine structural elements, insulation, flooring, and moisture barriers.

Frequently asked questions

Questions about construction details

More Frequently Asked Questions
What construction details does a prefabricated house require?

The main areas are the foundation and the base of the structure, the joints in the floor slabs, the corners and openings in the facade, and the roof flashinges. Each of these areas involves coordinating the structure, insulation, exterior walls, waterproofing, and finishes.

How is the junction between the facade and the steel structure resolved?

This detail connects the structural tube to the enclosure panel, the exterior or interior insulation, and the cladding. At corners and openings, special care is taken to ensure that the layers of the building envelope are continuous.

What types of roofs can be built on a prefabricated house?

Flat or sloped, with one, two, or more slopes. The details address slopes, panels, substructure, eaves, gables, ridges, gutters, and junctions with the facade.

What type of floor slab does a house with a steel frame have?

It depends on the project: a slab on grade, a sanitary floor slab, or a steel floor slab between stories—all calculated based on loads, spans, and structural analysis.

Do they comply with the Technical Building Code?

The system's design details are intended to comply with the CTE standards for livability, safety, and energy efficiency. For each home, the technical design and structural calculations specify the solutions.

Do these details work for any home?

Not directly. These are reference specifications for the StarModul system. The final configuration, thicknesses, anchors, and joints are tailored to the technical design and calculations for each home.